Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 30, 2024 11:44 am


All times are UTC - 5 hours


Forum rules


Be Nice to our new friends! Remember, everybody starts somewhere!




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Which Kit ???
PostPosted: Mon Jun 22, 2009 5:28 pm 
Offline
Walnut
Walnut

Joined: Sat Jun 20, 2009 11:53 am
Posts: 31
Location: Victoria, Texas
First name: William
Last Name: Wise
City: Victoria
State: Texas
Zip/Postal Code: 77901
Country: USA
Focus: Build
Status: Amateur
Howdy everyone, Here is my first question. Since I have never built an acoustic, which kit would be best to start with. I would like it to have the sides already bent, a bolt on neck, fingerboard already has a radius, and come complete with everything that will be needed, minus glues, finish and tools. Most of the tools I will be able to make. I would like it to be a dread, maple back and sides would be nice, but thats not set in stone. I would also like it to be priced for a novice. Dont want to drop a bundle on the first one.

Looking forward to hearing your advice
Thanks in advance
Bill

_________________
De Oppresso Liber


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Tue Jun 23, 2009 12:31 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 01, 2009 9:43 am
Posts: 601
Location: Bozeman, Montana
Focus: Build
The LMI kit wizard will allow you to completely customize the materials and level of servicing. Just follow the link above.

_________________
http://www.booneguitars.com
https://www.facebook.com/pages/Stephen-Boone-guitar-builder/488208541257210


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Tue Jun 23, 2009 3:16 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 17, 2009 10:22 am
Posts: 393
First name: Martin
Last Name: Lane
City: Grand Rapids
State: Michigan
Focus: Build
as a first time kit builder, I couldn't rationalize paying top dollar for fine flawless materials, as in the LMII kits. Martin kits contain pieces with slight flaws but that are still perfectly use-able. so when I purchased my kit I went with Steve Kovacik because he was able to put together something with parts that matched what I wanted, and send me a picture before I paid for it. if any of the pieces contain blemishes he will tell you what they are, but it's my understanding that if you buy a kit from Martin, they don't. many of his kits go for a good price on ebay. his ebay seller id is "asaa."

other great kit suppliers are John Hall (Blues Creek Guitars) and Ken Cierpilowski (Kenneth Michael Guitars). they are forum folk and are very helpful.


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Sun Jun 28, 2009 1:17 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 22, 2008 9:31 pm
Posts: 1877
First name: Darryl
Last Name: Young
State: AR
Country: USA
Focus: Build
Status: Amateur
+1 on the recommendation to buy from John Hall. He can get you Martin kits or he can custom make you a kit.

_________________
Formerly known as Adaboy.......


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Sun Jun 28, 2009 8:56 am 
Offline
Walnut
Walnut

Joined: Sat Jun 20, 2009 11:53 am
Posts: 31
Location: Victoria, Texas
First name: William
Last Name: Wise
City: Victoria
State: Texas
Zip/Postal Code: 77901
Country: USA
Focus: Build
Status: Amateur
Thanks for the great advice everyone, I am looking at a couple of kits, one from John and one from Steve. Will let you know which one I get.

Thanks again
Bill

_________________
De Oppresso Liber


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Sun Jun 28, 2009 11:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Mar 24, 2006 12:42 pm
Posts: 2360
Location: Windsor Ontario Canada
First name: Fred
Last Name: Tellier
City: Windsor
State: Ontario
Zip/Postal Code: N8T2C6
Country: Canada
Focus: Build
Status: Amateur
I started with a Martin kit and had no issues with the parts, many times the reason the parts end up at the guitar makers connection is hard to find. The top was not as pretty as others I have used since, but it was very nice. The Rosewood was flawless. On a visit to martin I went through a lot of backs sides and tops and often the flaws are outside the template, but the Martin workers are very picky about what is used.

That said, if doing it again I would deal with John Hall, I have met John, seen his shop, and spoken and had email exchanges with him and he is very helpfull. The difference for me would be John's willingness to answer questions and back up what he sells.

My vote is for a Blues Creek kit.

Fred

_________________
Fred Tellier
http://www.fetellierguitars.com
Facebook page http://www.facebook.com/pages/FE-Tellier-Guitars/163451547003866


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Sun Jun 28, 2009 5:20 pm 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 10, 2009 3:41 pm
Posts: 708
Location: Bothell, WA USA
First name: Jim
Last Name: Hansen
Country: USA
Focus: Build
Status: Amateur
I'm going to second what Fred said.

I highly recommend John, for the simple reason that if you have questions or problems, he will be there to back you up, help you out, etc...

Jim

_________________
Jim Hansen


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Wed Jul 08, 2009 8:39 am 
Offline
Koa
Koa
User avatar

Joined: Tue Mar 18, 2008 8:43 am
Posts: 776
Location: Florida
First name: John
Last Name: Killin
Focus: Build
Status: Amateur
I can see value to asking a luthier their opinion on a specific piece of wood from your kit. If John or Steve does this, I would go with them. When you are starting out (and I am just starting out) receiving a box of lumber is great. You can order a kit with master grade materials, but what next? Do you know why your materials are considered Master grade over student grade? What you really want to do (or at least I do) is build a reference on what you get in the box. It may be a master grade top, but is it stiff? What would a master luthier do with that top?

I would think that if you could ask your kit supplier for that kind of feedback, it would put your guitar building knowledge that much farther forward. The supplier that is willing to provide that service is the one I would go with.

John


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Fri Jul 10, 2009 8:41 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Jan 27, 2008 4:10 pm
Posts: 2764
First name: Tom
Last Name: West
State: Nova Scotia
Country: Canada
Focus: Build
Status: Amateur
John Hall is your man. Unless you have built before,and it sounds like you have not,the help and advise is worth more then the kit. An awful disease,this guitar building.Have not met anyone who has found a cure.Self inflicked,as are the other vices. Good luck in your travels

_________________
A person who has never made a mistake has never made anything!!!


Top
 Profile  
 
 Post subject: Re: Which Kit ???
PostPosted: Fri Jul 10, 2009 8:52 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Oct 27, 2007 1:49 pm
Posts: 144
Location: North Carolina
I also would recommend a Blues Creek Kit. Get John to put you one together with an Adi top like the prewar Martins and a bolt on neck. What one man can do another man can do but it really helps if the one is willing to help the other.

Steve Brown


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 20 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com